3D Bioprinting Tecnology

Order an essay

References
Ozbolat, I.T. (2015) Bioprinting scale-up tissue and organ constructs for transplantation. Trends
Biotechnol. 33, 395–400 .
Weijie Peng, Derya Unutmaz, and Ibrahim T. Ozbolat. Bioprinting towards Physiologically
Relevant Tissue Models for Pharmaceutics. Trends in Biotechnology, September 2016, Vol. 34,
No. 9. 722-732.
S. Vijayavenkataraman, W.F. Lu, J.Y.H. Fuh. 3D bioprinting – An Ethical, Legal and Social Aspects
(ELSA) framework. Bioprinting 1-2 (2016) 11–21.
Dababneh, A. and Ozbolat, I.T. (2014) Bioprinting technology: a current state-of-the art review. J.
Manuf. Sci. Eng. 136, 061016
Ozbolat, I.T. and Hospodiuk, M. (2016) Current advances and future perspectives in extrusionbased
bioprinting. Biomaterials 76, 321–343
IT Ozbolat，W Peng，V Ozbolat. Application areas of 3D bioprinting. Drug Discovery Today,
2016, 21(8):1257-1271.
Klebe, R.J. (1988) Cytoscribing: a method for micropositioning cells and the construction of twoand
three-dimensional synthetic tissues. Exp. Cell Res. 179, 362–373.
Saunders, R.E. and Derby, B. (2014) Inkjet printing biomaterials for tissue engineering: bioprinting.
Int. Mater. Rev. 59, 430–448
Riggs, B.C. et al. (2011) Matrix-assisted pulsed laser methods for biofabrication. MRS Bull. 37,
1043–1050.
Bertassoni, L.E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A.L., et al.,
2014b. Hydrogel bioprinted microchannel networks for vascularization of tissue engineering
constructs. Lab Chip 14 (13), 2202–2211.
Taylor, R.E., Kim, K., Sun, N., Park, S.J., Sim, J.Y., Fajardo, G., et al., 2013. Sacrificial layer
technique for axial force post assay of immature cardiomyocytes. Biomed. Microdevices 15 (1),
171–181.
Miller, J.S., Stevens, K.R., Yang, M.T., Baker, B.M., Nguyen, D.-H.T., Cohen, D.M., et al., 2012.
Rapid casting of patterned vascular networks for perfusable engineered threedimensional
tissues. Nat. Mater. 11 (9), 768–774.
Kolesky, D.B., Truby, R.L., Gladman, A.S., Busbee, T.A., Homan, K.A., Lewis, J.A., 2014. 3D
bioprinting of vascularized, heterogeneous cell-laden tissue constructs. Adv. Mater. 26 (19),
3124–3130.
Hinton, T.J., Jallerat, Q., Palchesko, R.N., Park, J.H., Grodzicki, M.S., Shue, H.-J., et al., 2015.
Three-dimensional printing of complex biological structures by freeform reversible embedding
of suspended hydrogels. Sci. Adv. 1 (9), e1500758.
Christian Mandrycky, Zongjie Wang, Keekyoung Kim, Deok-Ho Kim. 3D bioprinting for
engineering complex tissues. Biotechnology Advances 34 (2016) 422–434.
Murphy, S.V., Atala, A., 2014. 3D bioprinting of tissues and organs. Nat. Biotechnol. 32 (8), 773–
785.
Tumbleston, J.R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A.R., Kelly, D., et
al., 2015. Continuous liquid interface production of 3D objects. Science 347 (6228), 1349–1352
(80- )
Ousterout, D.G., Perez-Pinera, P., Thakore, P.I., Kabadi, A.M., Brown, M.T., Qin, X., et al., 2013.
Reading frame correction by targeted genome editing restores dystrophin expression in cells
from Duchenne muscular dystrophy patients. Mol. Ther. 21 (9), 1718–1726.
Kim, P., Yuan, A., Nam, K.-H., Jiao, A., Kim, D.-H., 2014b. Fabrication of poly(ethylene glycol):
gelatin methacrylate composite nanostructures with tunable stiffness and degradation for
vascular tissue engineering. Biofabrication 6, 024112.
Shin, S.R., Jung, S.M., Zalabany, M., Kim, K., Zorlutuna, P., Kim, S.B., et al., 2013.
Carbonnanotube-embedded hydrogel sheets for engineering cardiac constructs and bioactuators.
ACS Nano 7 (3), 2369–2380.
Zhang, X., Xu, B., Puperi, D.S., Yonezawa, A.L., Wu, Y., Tseng, H., et al., 2015. Integrating valveinspired
design features into poly(ethylene glycol) hydrogel scaffolds for heart valve tissue
engineering. Acta Biomater. 14, 11–21.
Ober, T.J., Foresti, D., Lewis, J.A., 2015. Active mixing of complex fluids at the microscale. Proc.
Natl. Acad. Sci. U. S. A. 112 (40), 12293–12298.
Y. Yoshimura, Bioethical aspects of regenerative and reproductive medicine, Hum. Cell 19 (2006)
83–86.
T.S. Sadiq, D.A. Gerber, Stem cells in modern medicine: reality or myth? J. Surg. Res. 122 (2004)
280–291.
K. Iijima, et al., Transplantation of preserved human amniotic membrane for bladder augmentation
in rats, Tissue Eng. 13 (2007) 513–524.
P.R. Henon, Human embryonic or adult stem cells: an overview on ethics and perspectives for tissue
engineering, in: Tissue Eng. Stem Cells Gene Ther., Springer, US, 2003.
Gu Qi, Hao Jie, Lu Yangjie, Wang Liu, Wallace Gordon G, & Zhou Qi. Three-dimensional bioprinting.
Sci China Life Sci. Vol.58 No.5: 411–419.
Jakab K, Norotte C, Damon B, Marga F, Neagu A, Besch-Williford CL, Kachurin A, Church KH,
Park H, Mironov V, Markwald R, Vunjak-Novakovic G, Forgacs G. Tissue engineering by selfassembly
of cells printed into topologically defined structures. Tissue Eng Part A, 2008, 14:
413–421.
Koch L, Kuhn S, Sorg H, Gruene M, Schlie S, Gaebel R, Polchow B, Reimers K, Stoelting S, Ma
N, Vogt PM, Steinhoff G, Chichkov B. Laser printing of skin cells and human stem cells. Tissue
Eng Part C Methods, 2010, 16: 847–854.
Gruene M, Pflaum M, Hess C, Diamantouros S, Schlie S, Deiwick A, Koch L, Wilhelmi M,
Jockenhoevel S, Haverich A, Chichkov B. Laser printing of three-dimensional multicellular
arrays for studies of cell-cell and cell-environment interactions. Tissue Eng Part C Methods,
2011, 17: 973–982.
Derby B. Bioprinting: Inkjet printing proteins and hybrid cell-containing materials and structures. J
Mater Chem, 2008, 18: 5717–5721.
De Cossart L, How T, Annis D. A two year study of the performance of a small diameter
polyurethane (biomer) arterial prosthesis. J Cardiovasc Surg, 1989, 30: 388
Wu LQ, Payne GF. Biofabrication: using biological materials and biocatalysts to construct
nanostructured assemblies. Trends Biotechnol, 2004, 22: 593–599
Mironov V, Trusk T, Kasyanov V, Little S, Swaja R, Markwald R. Biofabrication: a 21st century
manufacturing paradigm. Biofabrication, 2009, 1: 022001.
B. Raphael, T. Khalil, V.L. Workman, A. Smith, C.P. Brown, C. Streulli, A. Saiani, M. Domingos,
3D cell bioprinting of self-assembling peptide-based hydrogels, Materials Letters (2016), doi:
http://dx.doi.org/10.1016/j.matlet.2016.12.127.
Dafydd O. Visscher, Elisabet Farré-Guasch, Marco N. Helder, Susan Gibbs, Tymour Forouzanfar,
Paul P. van Zuijlen, and Jan Wolff. Advances in Bioprinting Technologies for Craniofacial
Reconstruction. Trends in Biotechnology, September 2016, Vol. 34, No. 9, 700-710.
Gao, G. et al. (2014) Bioactive nanoparticles stimulate bone tissue formation in bioprinted threedimensional
scaffold and human mesenchymal stem cells. Biotechnol. J. 9, 1304–1311 .
Wang, X. et al. (2014) Effect of bioglass on growth and biomineralization of SaOS-2 cells in
hydrogel after 3D cell bioprinting. PLoS ONE 9, e112497.
Sawkins, M.J. et al. (2015) Cell and protein compatible 3D bioprinting of mechanically strong
constructs for bone repair. Biofabrication 7, 035004.
Levato, R. et al. (2014) Biofabrication of tissue constructs by 3D bioprinting of cell-laden
microcarriers. Biofabrication 6, 035020.
Wüst, S. et al. (2014) Tunable hydrogel composite with two-step processing in combination with
innovative hardware upgrade for cell based three-dimensional bioprinting. Acta Biomater 10,
630–640.
Du, M. et al. (2015) 3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBDBMP2-collagen
microfibers. Biofabrication 7, 044104.
Sándor, G.K. et al. (2014) Adipose stem cells used to reconstruct 13 cases with cranio-maxillofacial
hard-tissue defects. Stem Cells Transl. Med. 3, 530–540.
Markstedt, K. et al. (2015) 3D bioprinting human chondrocytes with nanocellulose–alginate bioink
for cartilage tissue engineering applications. Biomacromolecules 16, 1489–1496.
Lee, J.-S. et al. (2014) 3D printing of composite tissue with complex shape applied to ear
regeneration. Biofabrication 6, 024103.
Müller, M. et al. (2015) Nanostructured pluronic hydrogels as bioinks for 3D bioprinting.
Biofabrication 7, 035006.
Kesti, M. et al. (2015) A versatile bioink for three-dimensional printing of cellular scaffolds based
on thermally and photo-triggered tandem gelation. Acta Biomater. 11, 162–172.
Wei Long Ng, Shuai Wang, Wai Yee Yeong, and May Win Naing. Skin Bioprinting: Impending
Reality or Fantasy? Trends in Biotechnology, September 2016, Vol. 34, No. 9, 689-699.
Guillotin, B. and Guillemot, F. (2011) Cell patterning technologies for organotypic tissue
fabrication. Trends Biotechnol. 29, 183–190.
Abbott, R.D. and Kaplan, D.L. (2015) Strategies for improving the physiological relevance of
human engineered tissues. Trends Biotechnol. 33, 401–407.
Michael, S. et al. (2013) Tissue engineered skin substitutes created by laser-assisted bioprinting
form skin-like structures in the dorsal skin fold chamber in mice. PLoS ONE 8, e57741.
Nikkhah, M., Eshak, N., Zorlutuna, P., Annabi, N., Castello, M., Kim, K., et al., 2012. Directed
endothelial cell morphogenesis in micropatterned gelatin methacrylate hydrogels. Biomaterials
33 (35), 9009–9018.
Bauer, M., Kim, K., Qiu, Y., Calpe, B., Khademhosseini, A., Liao, R., et al., 2012. Spot
identification and quality control in cell-based microarrays. ACS Comb. Sci. 14 (8), 471–477.
Zhang, H., Xu, K., Ai, H., Chen, D., Xv, L., Chen, M., 2008. Synthesis, characterization and
solution properties of hydrophobically modified polyelectrolyte poly(AA-coTMSPMA). J.
Solut. Chem. 37 (8), 1137–1148.
Araujo, J.V., Davidenko, N., Danner, M., Cameron, R.E., Best, S.M., 2014. Novel porous scaffolds
of pH responsive chitosan/carrageenan-based polyelectrolyte complexes for tissue engineering.
J. Biomed. Mater. Res. A 4415–4426.
Nichol, J.W., Koshy, S.T., Bae, H., Hwang, C.M., Yamanlar, S., Khademhosseini, A., 2010. Cellladen
microengineered gelatin methacrylate hydrogels. Biomaterials 31 (21), 5536–5544.
Bajaj, P., Schweller, R.M., Khademhosseini, A., West, J.L., Bashir, R., 2014. 3D biofabrication
strategies for tissue engineering and regenerative medicine. Annu. Rev. Biomed. Eng. 16, 247–
276.
Murphy, S.V., Skardal, A., Atala, A., 2013. Evaluation of hydrogels for bio-printing applications. J.
Biomed. Mater. Res. A 101 A (1), 272–284.
Kim, H.N., Kang, D.-H., Kim, M.S., Jiao, A., Kim, D.-H., Suh, K.-Y., 2012. Patterning methods for
polymers in cell and tissue engineering. Ann. Biomed. Eng. 40 (6), 1339–1355.
Williams, D.F., 2008. On the mechanisms of biocompatibility. Biomaterials 29 (20), 2941–2953.
Dolati, F., Yu, Y., Zhang, Y., De Jesus, A.M., Sander, E.A., Ozbolat, I.T., 2014. In vitro evaluation of
carbon-nanotube-reinforced bioprintable vascular conduits. Nanotechnology 25 (14), 145101.
Hong, S., Song, S.J., Lee, J.Y., Jang, H., Choi, J., Sun, K., et al., 2013. Cellular behavior in
micropatterned hydrogels by bioprinting system depended on the cell types and cellular
interaction. J. Biosci. Bioeng. 116 (2), 224–230.
Visser, J., Peters, B., Burger, T.J., Boomstra, J., Dhert, W.J.A., FPW, M., et al., 2013. Biofabrication
of multi-material anatomically shaped tissue constructs. Biofabrication 5 (3), 035007.
Ozbolat, I.T., Yu, Y., 2013. Bioprinting toward organ fabrication: challenges and future trends. IEEE
Trans. Biomed. Eng. 60 (3), 691–699.
Zorlutuna, P., Vrana, N.E., Khademhosseini, A., 2013. The expanding world of tissue engineering:
the building blocks and new applications of tissue engineered constructs. IEEE Rev. Biomed.
Eng. 6, 47–62.
Zhu, J., Marchant, R.E., 2011. Design properties of hydrogel tissue-engineering scaffolds. Expert
Rev. Med. Devices 8 (5), 607–626.
Schuurman, W., Khristov, V., Pot, M.W., van Weeren, P.R., Dhert, W.J.A., Malda, J., 2011.
Bioprinting of hybrid tissue constructs with tailorable mechanical properties. Biofabrication 3
(2), 021001.
Xu, T., Binder, K.W., Albanna, M.Z., Dice, D., Zhao, W., Yoo, J.J., et al., 2013. Hybrid printing of
mechanically and biologically improved constructs for cartilage tissue engineering applications.
Biofabrication 5 (1), 015001.
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., et al., 2014. Printing
threedimensional tissue analogues with decellularized extracellular matrix bioink. Nat.
Commun. 5, 3935.
Balint, R., Cassidy, N.J., Cartmell, S.H., 2014. Conductive polymers: towards a smart biomaterial
for tissue engineering. Acta Biomater. 10 (6), 2341–2353.
Jakus, A.E., Secor, E.B., Rutz, A.L., Jordan, S.W., Hersam, M.C., Shah, R.N., 2015.
Threedimensional printing of high-content graphene scaffolds for electronic and biomedical
applications. ACS Nano 9 (4), 4636–4648.
Villar, G., Graham, A.D., Bayley, H., 2013. A tissue-like printed material. Science 340 (6128), 48–
52.
Weijie Peng, Derya Unutmaz, and Ibrahim T. Ozbolat. Bioprinting towards Physiologically
Relevant Tissue Models for Pharmaceutics. Trends in Biotechnology, September 2016, Vol. 34,
No. 9, 722-732.
Rimann, M. and Graf-Hausner, U. (2012) Synthetic 3D multicellular systems for drug development.
Curr. Opin. Biotechnol. 23, 803–809.
Gaharwar, A.K. et al. (2015) 3D biomaterial microarrays for regenerative medicine: current stateof-the-art,
emerging directions and future trends. Adv. Mater. Published online 26 November,
2015. http://dx.doi.org/10.1002/adma.201503918
Edmondson, R. et al. (2014) Three-dimensional cell culture systems and their applications in drug
discovery and cell-based biosensors. Assay Drug Dev. Technol. 12, 207–218.
Eglen, R.M. and Randle, D.H. (2015) Drug discovery goes threedimensional: goodbye to flat highthroughput
screening? Assay Drug Dev. Technol. 13, 262–265.
Dolati, F., Yu, Y., Zhang, Y., De Jesus, A.M., Sander, E.A., Ozbolat, I.T., 2014. In vitro evaluation of
carbon-nanotube-reinforced bioprintable vascular conduits. Nanotechnology 25 (14), 145101.
Talelli, M., Rijcken, C.J.F., Lammers, T., Seevinck, P.R., Storm, G., Van Nostrum, C.F., et al., 2009.
Superparamagnetic iron oxide nanoparticles encapsulated in biodegradable thermosensitive
polymeric micelles: toward a targeted nanomedicine suitable for image-guided drug delivery.
Langmuir 25 (4), 2060–2067.
Pati, F., Song, T.-H., Rijal, G., Jang, J., Kim, S.W., Cho, D.-W., 2015. Ornamenting 3D printed
scaffolds with cell-laid extracellular matrix for bone tissue regeneration. Biomaterials 37, 230–
241.
Yao, Q., Wei, B., Guo, Y., Jin, C., Du, X., Yan, C., et al., 2015. Design, construction and mechanical
testing of digital 3D anatomical data-based PCL-HA bone tissue engineering scaffold. J. Mater.
Sci. Mater. Med. 26 (1), 5360.
Wang, M.O., Piard, C.M., Melchiorri, A., Dreher, M.L., Fisher, J.P., 2015. Evaluating changes in
structure and cytotoxicity during in vitro degradation of three-dimensional printed scaffolds.
Tissue Eng. A 21 (9-10), 1642–1653.
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., Cho, D.-W., 2013. An additive manufacturing based
PCL–alginate–chondrocyte bioprinted scaffold for cartilage tissue engineering. J. Tissue Eng.
Regen. Med.
Lee, J.-S., Hong, J.M., Jung, J.W., Shim, J.-H., Oh, J.-H., Cho, D.-W., 2014. 3D printing of
composite tissue with complex shape applied to ear regeneration. Biofabrication 6 (2), 024103.
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., Gatenholm, P., 2015. 3D
bioprinting human chondrocytes with nanocellulose–alginate bioink for cartilage tissue
engineering applications. Biomacromolecules 16 (5), 1489–1496.
Owens, C.M., Marga, F., Forgacs, G., Heesch, C.M., 2013. Biofabrication and testing of a fully
cellular nerve graft. Biofabrication 5 (4), 045007.
Pateman, C.J., Harding, A.J., Glen, A., Taylor, C.S., Christmas, C.R., Robinson, P.P., et al., 2015.
Nerve guides manufactured from photocurable polymers to aid peripheral nerve repair.
Biomaterials 49, 77–89.
Huh, D.D., Kim, D.-H., 2015. JALA special issue: microengineered cell- and tissuebased assays for
drug screening and toxicology applications. J. Lab. Autom. 20 (2), 79–81.
Nam, K.-H., Smith, A.S.T., Lone, S., Kwon, S., Kim, D.-H., 2015. Biomimetic 3D tissue models for
advanced high-throughput drug screening. J. Lab. Autom. 20 (3), 201–215.
Visser J, Melchels FP, Jeon JE, et al. Reinforcement of hydrogels using three dimensionally printed
microfibres. Nat Commun. 2015;6:6933.
Tsai YC, Li S, Hu SG, et al. Synthesis of thermoresponsive amphiphilic polyurethane gel as a new
cell printing material near body temperature. ACS Appl Mater Interfaces. 2015;7:27613e27623.
Hong S, Sycks D, Chan HF, et al. 3D printing of highly stretchable and tough hydrogels into
complex, cellularized structures. Adv Mater. 2015;27: 4035-4040.
Hong-Bo Zhang, Tian-Long Xing, Rui-Xue Yin, Yong Shi, Shi-Mo Yang, Wen-Jun Zhang. Threedimensional
bioprinting is not only about cell-laden structures. Chinese Journal of
Traumatology 19 (2016) 187-192.
Hsieh FY, Lin HH, Hsu SH. 3D bioprinting of neural stem cell-laden thermoresponsive
biodegradable polyurethane hydrogel and potential in central nervous system repair.
Biomaterials. 2015;71:48e57.
Groll J, Boland T, Blunk T, Burdick JA, Cho DW, Dalton PD, Derby B, Forgacs G, Li Q, Mironov
VA, Moroni L, Nakamura M, Shu W, Takeuchi S, Vozzi G, Woodfield TBF, Xu T, Yoo JJ, Malda
J, Biofabrication: reappraising the definition of an evolving field. Biofabrication 8 (2016)
013001.
Caetano G, Violante R, Sant´Ana AB, Murashima AB, Domingos M, Gibson A, Bártolo P, Frade
MA. Cellularized versus decellularized scaffolds for bone regeneration. Mater. Lett. 182 (2016)
318–322.
Oliveira SM, Reis RL, Mano JF. Towards the design of 3D multiscale instructive tissue engineering
constructs: Current approaches and trends, Biotechnol. Adv. 33 (2015) 842–855.
Melchels FPW, Blokzijl MM, Levato R, Peiffer QC, Ruijter M, Hennink WE, Vermonden T, Malda
J. Hydrogel-based reinforcement of 3D bioprinted constructs. Biofabrication 8 (2016) 035004.
Murphy SV, Skardal A, Atala A. Evaluation of hydrogels for bio-printing applications. J. Biomed.
Mater. Res. 101A (2013) 272–284.
Wang Z, Abdulla R, Parker B, Samanipour R, Ghosh S, Kim K. A simple and high-resolution
stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks.
Biofabrication 7 (2015) 045009.
Schacht K, Jungst T, Schweinlin M, Ewald A, Groll J, Scheibel T. Biofabrication of Cell-Loaded 3D
Spider Silk Constructs. Angew. Chem. Int. Ed. 54 (2015) 2816 –2820
Zehnder T, Sarker B, Boccaccini AR, Detsch R. Evaluation of an alginate–gelatine crosslinked
hydrogel for Bioplotting, Biofabrication 7 (2015) 025001
Jungst T, Smolan W, Schacht K, Scheibel T, Groll J. Strategies and Molecular Design Criteria for
3D Printable Hydrogels, Chem. Rev. 116 (2016) 1496−1539.
Kang LH, Armstrong PA, Lee LJ, Duan B, Kang KH, Butcher JT. Optimizing Photo- Encapsulation
Viability of Heart Valve Cell Types in 3D Printable Composite Hydrogels. Ann. Biomed. Eng.
(2016) doi:10.1007/s10439-016-1619-1.
Xu, F., Moon, S., Emre, A.E., Lien, C., Turali, E.S., Demirci, U., 2009. Cell bioprinting as a
potential high-throughput method for fabricating cell-based biosensors (CBBs). Proc IEEE
Sensors, pp. 387–391.
Tasoglu, S., Demirci, U., 2013. Bioprinting for stem cell research. Trends Biotechnol. 10–19.